How to Fix a Lighter that Won’t Spark: All Steps

To smokers and collectors, lighters are at times more than just mere necessities. It’s often a passion. 

… and to satisfy this deep drive for lighters, people go far and wide, visit auction fairs and events to collect the best lighters. 

They sit and adore their collection only to find that a few of them would spark but not light. 

Huh, that’s odd. A quick search by the enthusiast reveals the most asked question: How to Fix a Lighter that Won’t Spark?

I am here to answer that! 

If you intend to fix your Butane lighter, then you may be in luck. These types of lighters are convenient and economical fire sources. But yes, it might break within a few days of purchase. 

Thankfully, these can be fixed right at home, and you need not get it fixed by the manufacturer or, worse, replace it altogether. so here are some simple steps regarding How to Fix a Lighter that Won’t Spark

How to fix a lighter that won’t spark: Actionable Steps

Step 1

Hold down the ignition button to release the gas into the burner. Hold onto it until the gas leaves.

Step 2

Locate the flame control button, usually placed at the bottom of the lighter. Use a blade or a screwdriver for this purpose. Push the flame adjustment button towards the ‘+’ sign. Then try to light again.

Step 3

Cleanse the tank of the old butane fuel and of any air that might be caught in it. Press the fuel fill valve with a blade or screwdriver to release the fuel and air. 

Step 4

Refill the fuel valve of the lighter with fresh butane fuel.  

Step 5

Use compressed air to clean the gas chamber of the lighter. Make sure the nozzle of the compressed air can is 1 inch away from the burner chamber. Direct short blasts of air into the chamber to remove any carbon dioxide or debris. 

Finally, you can try to light your lighter. This should work, but in case it doesn’t, do not lose hope.

There are a few other means that you can use:

How to Fix a Lighter that Won’t Spark: Other Ways

Clean the unit frequently:

If you are a lighter enthusiast, then you know that just storing the lighters in a cool, dry place won’t keep them working forever. 

If you want your lighters to last long after purchase, you need to clean them regularly with essential oils. Plus, before locking the lighters away in an airtight box, make it a point to wipe them with a silk cloth. 

A torch lighter must be cleaned daily as dust and sand particles enter the lighter naturally during use. If you can remove any debris from the tip of the lighter, it should work fine. 

Flame adjustment:

If your lighter is producing a spark but not igniting, then try to adjust the flame of the unit. Nowadays, mostly all torch lighters have wheels for flame adjustment. 

If the setting is low, then it won’t make an effective flame. Once you have located the lighter wheel, spin it from the left to the right to create a flame that you like. 

Use good quality butane:

If you have to bleed the lighter tank and refill fresh butane, then make sure you select premium quality gas. You can even triple filter for this case. While pure butane will effectively clean the lighter from within, cheap quality butane will latch onto the tip of your lighter. 

Naturally, a clogged lighter tip will not be able to create the desired flame or any flame for that matter. It is advisable to Colibri premium butane. It is of excellent quality and does not damage the lighter in any way. 

Things you must do to care for your torch lighter:

These things you can follow so you don’t even have to know How to Fix a Lighter that Won’t Spark.

Refilling the tank once a week if the lighter is used daily: Similar to automobiles, the gas tank of the lighter must be refilled from time to time lest it stops working. Ideally, if the lighter is being used daily, it must be refilled every week. Do not open the lighter or make flame adjustments right after, the lighter stops functioning. Many a time, a lighter might stop working because of low gas. Once the flame starts getting low, it is a sign that the lighter is running low on gas. 

Do not adjust the flame habitually: Once the flame height has been set to the desired setting, there is no need to readjust it frequently. There are a maximum and minimum level of flame, and the lighter cannot produce anything beyond it. Trying to adjust the flame beyond that point will cause the lighter to malfunction.

Take out the gas from the tank while refilling the lighter: Press on the inlet valve for refilling with a small blade or screwdriver to take out the existing gas from the lighter. Wait for the hissing sound to stop (indicating that the gas chamber is clear) before refilling the lighter. If air exists in the lighter, refilling it with butane gas will not be effective.

Stop the flame holes from clogging: This is one of the prime reasons that cause any malfunction to a lighter. If the flame hole is clogged, it becomes difficult for the flame to burn. Thus, try to avoid carrying the lighter in your pocket if possible. If not, clean it regularly to keep the hole free from dust particles and debris. 

Pro tip: Do not bring the cigar or cigarette right on top of the flame hole while lighting them. Ashes from your smoke can clog your flame hole. Always use the flame to light. 

Wait for 2-5 minutes after refilling before igniting the flame: You need to wait for the fresh butane to reach room temperature. Right after the refilling, the butane is too cold, and thus the flame will not ignite. You need to wait for some time for the butane to reach room temperature.


With these tips handy, you should know how to fix a lighter that won’t spark. 

But it’s important to keep safety as the top priority. To that end, keep the windows open when refilling the gas chamber and cover your nose during the process. 

Finally, keep children away from the lighters and all the equipment required to fix them.

Leave a Comment